Packing and Shipping our Bicycles in Large Boxes
Packing and Shipping our Bicycles in Large Boxes
#1 Protecting the Front Wheel
Release the quick release and secure it in bubble wrap. Then attach the plastic caps on the end of the axles to protect the wheel.
#2 Attaching the dropout spacer
Clip the plastic spacer inbetween the fork drop-outs to protect the wheel.
#3 Remove the Saddle
Remove the saddle by loosening the screw with an Allen key. You can find a set of Allen keys in our Basic tool Kit for Vintage bikes.
#4 Reposition the Handlebars and Stem
To reduce the width of the bike for shipping, turn the stem 90° to the left and the handlebars about 90° down. Then you can tighten the bolts slightly.
#5 Protecting the Frame
Neoprene pipes are placed over the tubes and fasten into position with zip ties, this will prevent the frame from being scratched or dented when it is being shipped.
#6 Wrapping the Derailleurs
The derailleurs are protected with additional bubble wrap and are attached to the tubing with a zip tie.
#7 Boxing the Bicycle
Finally, the bicycle and its components into the box, and it’s ready to be shipped.
